Ink Cleaner Screen Wash - 1 Gallon
Defender Ink Degradent and Screen Wash is a water soluble blend of surface active agents and solvents formulated for the removal of screen printing inks. This product will solubilize and remove many types of inks such as: lacquer, enamel, vinyl, Mylar, polypropylene, polyvinyl chloride, acrylic poster, plastic plus, legendary, solder mask, epoxy, and photo imagable.
1. Card excessive ink from the screen. Spray or apply manually on to the ink side of the screen. Scrub both sides of the screen with a non-abrasive brush or pad, until the ink is liquefied.
2. Starting at the bottom of the screen, High pressure water rinse all ink residue from the screen. By rinsing from bottom to top, you will prevent the possibility of any ink locking back into the mesh when it comes in contact with the rinse water.
WARNING: This product can expose you to N-methyl-2-
pyrrolidone, which is known to the State of California to cause
birth defects and other reproductive harm. For more information
go to www.P65Warnings.ca.gov.